↑ Return to Attic Monitor

Print this Topic

Not optimum mode issue

Home Forums Attic Monitor Not optimum mode issue

This topic contains 0 replies, has 1 voice, and was last updated by  JoeClark 1 month, 1 week ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #1329

    JoeClark
    Participant

    Hello, please forgive me as i am a noob around here.
    I use a flight simulator called Prepared3d, it is not a true fullscreen simulator therefore vsyn doesent work properly. I have a Samsung C32F391FWU Curved Full HD Monitor 32″ and a GTX 980Ti using driver version 384.76. The simulator rarely gets above 40fps, on average around 30fps, and my monitor will only go down to 50hz refresh. I have tried CRU to drop it to 30Hz, but when i change the resolution a black screen pops up with a message which says not optimal mode, sugguest 60hz etc. Is there any way I can force this monitor to 30 or 40hz? This would then ensure a smooth simulation as the hz are the same as the fps.

    For more details : advertisement examples

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.

Permanent link to this article: http://w4krl.com/forums/topic/not-optimum-mode-issue/